Master Spa Twilight Series Manuel du propriétaire télécharger pdf (Page 34)

32DO NOT DIVE.

TEMPERATURE AND TEMP RANGE

TS 6.1, TS 67.15, TS 7.1, TS 7.15

adjustiNg the set temPerature

When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down

will cause the temperature to flash. Pressing a temperature button again will adjust the set

temperature in the direction indicated on the button. When the LCD stops flashing, the spa

will heat to the new set temperature when required.

If the panel has a single temperature button, pressing the button will cause the temperature to

flash. Pressing the button again will cause the temperature to change in one direction (e.g. UP).

After allowing the display to stop flashing, pressing the Temperature Button will cause the

temperature to flash and the next press will change the temperature in the opposite direction

(e.g. DOWN).

The temperature can be set between 80˚F and 104˚F.

Press-aNd-hold

If a Temperature button is pressed and held when the temperature is flashing, the temperature

will continue to change until the button is released. If only one temperature button is available

and the limit of the Temperature Range is reached when the button is being held, the progression

will reverse direction.

Temperature and Temp Range

DO NOT DIVE.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 75 76

Pas de commentaire

Master Spa Twilight Series Manuel du propriétaire Page 34